The CYCLE SENSOR is a system monitor that detects Rapid Cycle and Dry Run and reacts to either of these conditions by shutting down the pump. It does not control or prevent rapid cycle or dry run but protects your pump in the event these problems occur. This unit continuously displays the load characteristics of the motor when it is running. When a fault is detected, the relay will shut off the power to the pump and display RCYCLE for rapid cycle or DRY for a low current condition.
Model CS1PH1-2HP CYCLE SENSOR is only availalble for 230V single phase 1/3HP to 2HP pumps
Enclosure dimensions 4.5" W X 7" L X 3.5 "D and has knock outs on all sides.
Click this link for additional product information on the manufacturer website:
View Product Information
Cycle Stop Valves include a standard
12 month limited warranty.
