PK1A-LT: General Information
- Cycle Stop Valve model CSV1A (preset to 50 PSI)
- Wall mount kit
- 1/2" SS Pressure relief valve
- 1/2" x 1/4" SS hex reducer
- 1/4" x 1/4" snubber
- 1/4" SS tee
- (2) 1/4" x close SS nipple
- 0-100 pressure gauge
- 40/60 pressure switch
- Roll of teflon tape
Pressure Tank Not Included
This kit does not include a pressure tank but this system does require one. You can use the pressure tank you already have or you can replace it with a smaller pressure tank. We recommend no smaller than 4.5 gallons total capacity and no larger than 20 gallon total capacity size tank if replacing your old pressure tank. If plumbing your tank into the pressure tank port on the Cycle Stop Valve, port size is 3/4" female NPT. (See the instructions in the CSV1A box for specific valve settings if using tanks larger than 20 gallon)